Korg Musical Instrument manual Preference Tab, Record the samples, Heres what happened

TRITON Training Guide

Preference Tab:

9.Press the Preference tab and set the Zone Range to 1 key with the DIAL or Numeric keys. This setting means that each new index you'll be creating in the multi-samplewill be a half -step higher.

Recording Tab:

10.Press the Recording tab.

11.Press the REC/WRITE key to "arm" the sampler, and speak into the microphone. If "CLIP" flashes above the indicators in the Recording Level [dB] field, press the 0.0 "fader" and lower the level accordingly. If "ADC OVERLOAD" flashes above the indicators, the audio input level on the rear panel has been set too high - lower it until the "ADC OVERLOAD" indicator no longer flashes.

Record the samples:

12.Press the START/STOP key and say the word "It's". Press START/STOP again to stop sampling, then press Create (above the Recording Level indicators).

13.Press the START/STOP key and say the word "So". Press START/STOP again to stop sampling, then press Create (above the Recording Level indicators).

14.Press the START/STOP key and say the word "Easy". Press START/STOP again to stop sampling, then press Create (above the Recording Level indicators).

15.Press the START/STOP key and say the word "To". Press START/STOP again to stop sampling, then press Create (above the Recording Level indicators).

16.Press the START/STOP key and say the word "Sample". Press START/STOP again to stop sampling, then press Create (above the Recording Level indicators).

17.Press the START/STOP key and say the word "With". Press START/STOP again to stop sampling, then press Create (above the Recording Level indicators).

18.Press the START/STOP key and say the word "TRITON". Press START/STOP again to stop sampling, then press Create (above the Recording Level indicators). That's it!

19.Now play the keyboard - play each note (half - step) from C2 (Low-C) up to F#, and you'll hear the words: "Its So Easy To Sample With TRITON".

Here's what happened:

You just created a new Multisample! You set the Orig and Top keys to the same key, as well as setting the Zone Range to 1 key, and after you sampled a word and pressed Create, the TRITON automatically set the Orig and Top keys - 1 key higher than the previous sample, ready for the next sample. When you finished, your samples were mapped in half - steps across the keyboard! Like we said, it can't get any easier than this!

46