Kyocera 9530DN manual Automatic Form Feed Timeout Setting, Setting the Sleep Timer, Others

Using the Operation Panel

7

8

Press [OK].

Press [MENU]. The message display returns to Ready.

Automatic Form Feed Timeout Setting

When the printer receives no data for a certain time, it times out and releases the current interface: it prints whatever data it has in its buffer and feeds out the page. You can adjust the time-out time as follows:

1

2

3

4

5

Press [MENU].

Press U or V repeatedly until Others > appears.

Press Z.

Press Uor Vrepeatedly until >Form Feed Time Out appears. The default setting is 30 seconds.

Press [OK]. A blinking cursor (_) appears.

Others >

>Form Feed

Time Out 30 sec.

>Form Feed

Time Out 30 sec.

6	Press U or V to increase or decrease the value of the figure where the
	cursor is blinking and set the desired time. The time can be set between 0
	and 495 seconds, in 5-second increments. (The printer does not timeout
	with the value set to 0.) You can use Z and Y to move the cursor right and
	left.

7

8

Display the desired time and press [OK].

Press [MENU]. The message display returns to Ready.

Setting the Sleep Timer

1

2

The printer has a sleep timer to conserve power when the printer is not printing, processing, or receiving data. You can turn off the sleep timer function by following the procedure given below.

Press [MENU].

Press U or V repeatedly until Others >	Others	>
appears.

3 Press Z.

2-88 ADVANCED OPERATION GUIDE