Kyocera 9530DN manual Glossary

Models: 9530DN

1 172
Download 172 pages 63.1 Kb
Page 163
Image 163
Glossary

Glossary

AppleTalk AppleTalk offers file sharing and printer sharing and it also enables you to utilize application software that is on another computer on the same AppleTalk network.

Default Gateway This indicates the device, such as a computer or router, that serves as the entrance/exit (gateway) for accessing computers outside of the network that you are on. When no specific gateway is designated for a destination IP address, data is sent to the host that is designated as the Default Gateway.

DHCP (Dynamic Host This is a protocol that automatically resolves the IP address, Subnet Mask Configuration Protocol) and Gateway address on a TCP/IP network. Use of DHCP minimizes the load of network administration, especially on network environments with a large number of client computers where it is not specifically necessary to

assign a separate IP address to each client, including printers.

EcoPrint This is a printing mode that controls toner consumption. Pages printed in the Ecoprint mode are lighter than pages printed in the normal mode. The default setting is Off.

Emulation This refers to emulation of manufacturers’ printers. The printer emulates the operation of the following printers: PCL 6, KC-GL, Line printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, and KPDL.

Expansion memory This option is used to increase printer memory. The printer has an expansion socket, into which you can install a 128 MB, 256 MB and 512MB DIMM (Dual Inline Memory Module). See your Kyocera Mita dealer to purchase the DIMM that is best suited for use with this printer.

Form Feed Timeout While data is being sent to a printer, some pauses may occur. At this time, the printer waits for the next data without making a page break. Form feed timeout is a function to wait only a preset amount of time before it executes an automatic page break. After the waiting period begins, once the designated amount of time is exceeded, the printer will automatically process the currently received data and print it out. If the machine has received no print data for the last page, the printer ends processing of that job without outputting paper.

IEEE1284 This is a standard used when connecting a printer to a computer, and was established by the Institute of Electrical and Electronic Engineers in 1994.

IP Address The Internet Protocol address is a unique number that represents a (Internet Protocol Address) specific computer in a network. The format of an IP Address is four

numbers separated by dots, e.g. 192.168.110.171. Each number should be a decimal between 0 and 255.

ADVANCED OPERATION GUIDE

Glossary-1

Page 163
Image 163
Kyocera 9530DN manual Glossary