Kyocera 9530DN manual Expansion Memory Modules, Precautions for handling the memory module, Yes No

Options

Expansion Memory Modules

To expand the printer memory for more complex print jobs and faster print speed, you can plug in optional memory module (dual in line memory module) in the memory slot provided on the printer main controller board. You can select additional memory module from 64, 128, 256 or 512MB. The maximum memory size is 576MB.

NOTE: The expansion memory should only be installed by your service technician. We shall not be liable for any damages caused by improper installation of expansion memory.

Precautions for handling the memory module

To protect electronic parts, discharge static electricity from your body by touching a water pipe (faucet) or other large metal object before handling the memory module. Or, wear an antistatic wrist strap, if possible, when you install the memory module.

Always hold the main controller board or a memory module by its edges as shown below to avoid damaging electronic parts.

YES NO

Installing the Memory Module

See your dealer for purchasing information of the memory module that is best suited for use with this printer. 128 MB, 256 MB and 512 MB memory module can be used for memory expansion.

Remove the memory slot cover completely from the printer as follows:

1 Turn off the printer and disconnect the power cord and printer cable.

4-12 ADVANCED OPERATION GUIDE