Kyocera 9530DN Agenda, Copies, Delete, Deleting a Private Print/Stored Job, Printing a code job

Using the Operation Panel

Deleting a Private Print/Stored Job

1

2

3

You can individually delete stored jobs by performing the following procedure. Jobs saved using Private Print will be automatically deleted if you turn the power off after printing, but jobs saved using Stored Job will not be deleted automatically.

Follow steps 1 through 8 in the above section.

When the title of the job to be printed is
	>Agenda
displayed (Agenda, in this example), press
[OK]. Enter the four-digit access code	Copies	001
entered in the printer driver and press [OK].
Press V repeatedly until Delete appears
	>Agenda
for the number of copies.
	Delete

4	Press [OK]. Processing appears and private job is deleted from the hard
	disk.

Printing a code job

	Install the KM-NET for Clients from the CD-ROM supplied with the printer.
1	Start the KM-NET for Clients by proceeding from the start menu > All
	Programs > Kyocera > KM-NET for Clients.
2	Click on the Main screen. The Job Manager window appears.

3

4

5

Select the job(s) to operate.

Select the desired operation from the Operation menu. When you select Print operation, the print job wizard starts.

Follow the instructions displayed by the wizard.

2-28 ADVANCED OPERATION GUIDE