Using the Operation Panel
4
5
Press U or V repeatedly until >Duplex Mode appears.
Press [OK]. A blinking question mark (?) appears.
>Duplex Mode Off
>Duplex Mode
? Off
6 | Press U or V to display the desired duplex mode. The display changes as |
| |
| shown below. |
7
8
Off (default)
Short edge bind
Long edge bind
When the desired duplex mode is displayed, press [OK].
Press [MENU]. The message display returns to Ready.
Selecting the Output Stack
You can select whether printouts will be received by the printer’s top tray
1
2
3
4
5
Press [MENU].
Press U or V repeatedly until Paper Handling > appears.
Press Z.
Press U or V repeatedly until >Stack Select appears.
Press [OK]. A blinking question mark (?) appears. The selected output device will be displayed.
Paper Handling >
>Stack Select Top tray FaceDn
>Stack Select
? Top tray FaceDn
6 | Press U or V to display the desired destination. The output tray changes |
| |
| depending on an installed option. |
7
8
When the desired paper source is displayed, press [OK].
Press [MENU]. The message display returns to Ready.
ADVANCED OPERATION GUIDE |