Kyocera 9530DN manual Changing e-MPS Configuration, e-MPS Configuration Quick Copy

Using the Operation Panel

Changing e-MPS Configuration

You can change the following parameters for e-MPS operation:

•Maximum number of Quick Copy/Proof-and-Hold jobs

•Maximum space assigned to temporary code jobs

•Maximum space assigned to permanent code jobs

•Maximum space assigned to virtual mailboxes

NOTE: The total amount of storage area specified must not exceed the total size of the hard disk. Otherwise, you may only be able to accommodate a smaller number of print jobs than specified.

Changing the Maximum Number of Quick Copy/Proof-and-Hold Jobs

1

2

This changes maximum number of Quick Copy/Proof-and-Hold jobs from 0 to 50. The default is 32.

Press [MENU] key.

Press U or V repeatedly until e-MPS >	e-MPS	>
appears.

3

4

5

6

7

Press Z.

Press U or V repeatedly until >e-MPS Configuration > appears.

Press Z.

Press U or V repeatedly until >>Quick Copy appears.

Press [OK]. A blinking cursor (_) appears.

>e-MPS > Configuration

>>Quick Copy

32

>>Quick Copy

32

8	Press U or V to increase or decrease the value at the blinking cursor. The
	value can be set between 0 and 50. Use Z and Y to move the cursor right
	and left.

9

10

When the desired maximum number of jobs is set, press [OK].

Press [MENU]. The display returns to Ready.

ADVANCED OPERATION GUIDE 2-31