Kyocera 9530DN manual Setting Print Quality, KIR Kyocera Image Refinement Mode, Optimized stripes

Using the Operation Panel

Setting Print Quality

You can make the following settings to enhance the print quality: Kyocera Image Refinement (KIR), a software algorithm for increasing printout quality; EcoPrint, a printing mode that reduces toner consumption during printing; printing resolution; and Adjustment of Print Density.

KIR (Kyocera Image Refinement) Mode

This printer incorporates the KIR (Kyocera Image Refinement) smoothing function. At a resolution of 600 dpi this function provides high print quality by providing software enhanced print resolution.

With KIR Off	With KIR On
	(default)

NOTE: Set the print density to 3 when setting the KIR mode. For details on print density, refer to page 2-61. You can monitor the KIR test pattern, the last line on a status page, to make the optimum KIR mode setting.

Look at the check line, the last line on a status page, to make the optimum

KIR mode setting.

Status Page

KIR Test Pattern

	FS-9530DN	Page Printer
	STATUS PAGE
Hardware Information	Memory
Page Information	Installed Options
Network Status	Emulation
	Error Log
	Toner Gauge
	0	100
Interfaces
KIR Test pattern	ON

Optimized stripes

The current KIR setting is optimal.

Dark vertical stripes

Set the KIR mode to Off. Try printing the status page again. If you still get dark vertical stripes, adjust the print density control to a lighter setting.

2-58 ADVANCED OPERATION GUIDE