Kyocera 9530DN manual Memory Card Delete Data DataS001 ?DataS001, Deleting Data

Using the Operation Panel

Partition Type:	Type of data written (currently only type 2 is
	supported).
Partition Name:	The destination name of data written to the card.
Write Partition Length: The size of the written data on the memory card.
Others:	Error information.

When the memory card write information page is printed, the message display returns to Ready.

If the writing is not completed successfully, an error code appears on the message display. For details, refer to Error Messages on page 4-10 in the Operation Guide. If this happens, press [GO]. The message display returns to Ready.

9	Repeat above steps until you have transferred all data (files) that you want
	to write to the memory card. Each time you finish writing data, a memory
	card write information page is printed from the printer showing the
	information explained in step 8 above, but pertaining only to the data just
	written. To see all data contained in the memory card at once, print a list of
	data names as explained. Refer to Printing a List of Data Names on page
	2-67.
Deleting Data

It is possible to use the printer to delete data from a memory card one by one.

To delete data from a memory card, proceed as follows. Check that the memory card contains data. Otherwise, the >Delete Data menu will not appear on the message display.

1

2

3

4

5

Press [MENU].

Press U or V repeatedly until Memory Card > appears.

Press Z.

Press U or V repeatedly until >Delete Data appears. The data name also appears.

Press [OK]. A blinking question mark (?) appears before the data name.

Memory Card >

>Delete Data

DataS001

>Delete Data

?DataS001

6

7

Press U or V to display the desired data name.

Press [OK]. Processing appears and the data is deleted from the memory card. The display returns to Ready.

ADVANCED OPERATION GUIDE 2-65