Using the Operation Panel
7 | Press U or V to display the desired mode. The display changes as shown |
| |
| below. Press [OK]. |
| Auto (default) |
| Normal |
| High speed |
| Nibble (high) |
8 | Press [MENU]. The message display returns to Ready. |
Changing Serial Interface Modes
1
2
You can make a serial connection by installing the optional
You can set the baud rate, data bits, stop bits, parity, and protocol for the serial interface.
NOTE: This section applies to the printer having the optional
Press [MENU].
Press U or V repeatedly until Interface > appears. One of the interface names shown below appears, indicating the current interface.
Parallel |
|
USB | (default) |
Network | |
Option | (only when an optional network interface card is installed) |
Serial | (only when an optional |
3
4
Press [OK]. A blinking question mark (?) appears.
Press U or V repeatedly until Serial appears.
Interface
?Network
Interface
?Serial
5
Press [OK] again.
ADVANCED OPERATION GUIDE |