Kyocera 9530DN manual e-MPS, Job Retention, Quick Copy, Proof-and-Hold

Using the Operation Panel

e-MPS

e-MPS is an abbreviation for ‘enhanced-Multiple Printing System’ which implements the following functions that are available from the printer driver:

•Job Retention

•Job Storage

In either job mode, when printing a document, the print data is transferred from the computer to the printer then stored on the printer’s hard disk. Since copies of the document are printed using the stored data, printing is performed faster with less computer spooling time and less network traffic.

NOTE: To use the e-MPS system, an optional hard disk must be installed in the printer. For details, refer to Options on page 4-1. As an alternative to a hard disk, the RAM disk may be used in the Proof-and-Hold and Private Print modes. To activate the RAM disk in the printer, refer to Operating the RAM Disk on page 2-70.

Job Retention

Job Retention has four modes as summarized below. These modes are selected when you choose on the printer driver through the application software:

	Quick Copy	Proof-and-Hold
Primary function	To later print	To proof the first copy
	additional copies	before printing
		multiple copies
Storing started	Printer driver	Printer driver
Retrieved by	Operation panel	Operation panel
Default number of	Same as storing	One less
copies printed at
retrieval
Maximum number of	32,expandable to 50	32,expandable to 50
jobs stored*
PIN security	No	No
Data after printing	Retained	Retained
Data when power off	Deleted	Deleted

ADVANCED OPERATION GUIDE 2-23