Using the Operation Panel
Finishing
These settings are possible only when the optional finisher is installed on the printer.
Duplex Printing Error Detection Setting
This setting controls whether or not the message Duplex disabled Press GO appears when label or some other type of paper that is not supported for duplex printing is specified as the paper type when duplex printing is being performed.
On | • | Press [GO] to perform simple printing. | |
• | Press [CANCEL] to cancel the print job. | ||
| |||
|
| ||
Off | Disable duplex printing. (reverts to simplex printing) | ||
|
|
|
1
2
3
4
5
6
7
8
9
Press [MENU].
Press U or V repeatedly until Others > appears.
Press Z.
Press U or V repeatedly until >Finishing Error > appears.
Press Z.
Press U or V repeatedly until >>Duplex appears.
Press [OK]. A blinking question mark (?) appears.
Press U or V to change Off to On. Press [OK].
Others >
>Finishing > Error
>>Duplex Off
>>Duplex
? Off
10
To exit the menu selection, press [MENU].
ADVANCED OPERATION GUIDE |