Kyocera 9530DN manual default setting is On

KIR (Kyocera Image This is Kyocera Mita’s original smoothing function. It uses software to Refinement) enhance the printer’s resolution and produce high-quality printing. The

default setting is On.

KPDL KPDL is Kyocera’s implementation of the PostScript page description language Level3.

MP tray This is an abbreviation for Multi-Purpose tray. The MP tray is used instead of the cassette when printing on envelopes, postcards, transparency sheets, and labels.

NetBEUI (NetBIOS Extended An enhanced version of the NetBIOS protocol, it enables the utilization of User Interface) more advanced functions on small-scale networks than do other protocols

such as TCP/IP, etc.

Parallel Interface With this interface, data transfer between the printer and the computer takes place on 8-bit chunks. The printer can perform IEEE1284 compatible bi-directional communications.

PostScript This is a page description language developed by Adobe Systems, Inc. It enables flexible font functions and highly-functional graphics, allowing higher quality printing.

Printer driver The printer driver makes it possible for you to print data created using application software. The printer driver for the printer is on the Kyocera Mita Software Library CD-ROM supplied with the printer. Install the printer driver on the computer connected to the printer.

Sleep mode This mode is activated after a specified amount of time elapses. The printer goes into economy mode and a minimum amount of power is consumed. You can change the amount of time before the printer goes into sleep mode from the printer’s operation panel. The default setting is 15 minutes.

Status page This lists printer conditions, such as the printer’s memory, the total number of copies printed, and paper source settings.

Subnet Mask This is a 32-bit numerical value that defines which bits of the IP address specify the network address and which specify the host address.

TCP/IP (Transmission Control TCP/IP is a suite of protocols designed to define the way computers and Protocol/Internet Protocol) other devices communicate with each other over a network.

USB (Universal Serial Bus) An interface standard for low to middle speed serial interfaces. This printer supports Hi-Speed USB. The maximum transfer rate is 480 Mbps and the maximum cable length is 5 meters (16 feet).

Glossary-2 ADVANCED OPERATION GUIDE