Using the Operation Panel
1
2
3
4
Press [MENU].
Press U or V repeatedly until Memory Card > appears.
Press Z.
Press U or V repeatedly until >Write Data appears.
Memory Card | > |
|
|
>Write Data
5
6
7
Press [OK]. A blinking question mark (?) | >Write Data ? |
appears. |
Press [OK]. Processing appears, then Waiting.
In this state, send the file from the computer to the printer.
The file is written onto the memory card given a destination name (also referred to as a partition name) which the printer automatically assigns one after another as follows:
DataS001 (first data),
DataS002 (second data),
DataS003 (third data)...
In the example above, if the file TEST.TXT is the first data to be written onto the memory card, the destination name will be DataS001.
As the printer receives data, the message display changes to Processing, then when the end of the data is received, the message display changes to Waiting.
8 | Check that the message display has changed to Waiting, then press |
| |
| [GO]. This writes the file to the memory card and instructs the printer to |
| automatically print out a memory card write information page as shown |
| below. |
|
|
| WRITE INFORMATION |
ADVANCED OPERATION GUIDE |
