Kyocera 9530DN manual Using Quick Copy, e-MPS Quick Copy Harold

Using the Operation Panel

Using Quick Copy

This mode enables you to print the requested number of copies of a job, simultaneously storing the job on the hard disk. When additional copies are required, you can reprint the required number of copies from the printer operation panel.

The default number of print jobs that can be stored on the hard disk is 32. This value can be increased to up to 50 from the e-MPS Configuration menu. For details, refer to Changing e-MPS Configuration on page 2-31. When the number of jobs reaches the limit, the oldest job will be overwritten by the new one.

When the printer is turned off, all stored jobs will be deleted.

Printing Additional Copies using Quick Copy

To print additional copies of a job stored in the printer:

1

2

3

4

Press [MENU].

Press U or V repeatedly until e-MPS > appears.

Press Z.

Press U or V repeatedly until >Quick Copy appears followed by the user name (Harold, in this example). The user name is assigned at printing using the printer driver.

e-MPS>

>Quick Copy

Harold

5

6

7

8

9

Press [OK]. A blinking question mark (?) appears before the user name.

Press U or V to display the desired user name, Arlen, in this example.

Press [OK]. The job name entered in the printer driver (Report, in this example) appear with a blinking question mark (?) before the letters.

Press U or V to scroll to the desired job title.

Press [OK]. The number of copies to be printed can be set. To increase the copy count, press U; to decrease the copy count, press V.

>Quick Copy

?Harold

>Quick Copy

?Arlen

>Arlen

?Report

>Report

Copies 001

ADVANCED OPERATION GUIDE 2-25