Kyocera FS-C8026N manual Received Data Dump, Printer Resetting

Press the MENU key.

3.13 Other Modes

6	Press the U or V key to increase or decrease the
	value at the blinking cursor and set the desired time.
	The timer can be set between 5 and 240 min, in
	5-minute increments. Use the Z and Y keys to move
	the cursor right and left.
7	When the desired timeout time is displayed, press the
	ENTER key.
8	To exit the menu selection, press the MENU key.

3.13.4Received Data Dump

You can print data received by the printer as hexadecimal code for debugging programs and files.

1

2 Press the U or V key repeatedly until Others > appears.

Others >

3	Press the Z key.
4	Press the U or V key repeatedly until > Print
	HEX-DUMP appears.

>Print HEX-DUMP

5 Press the ENTER key. A question mark (?) appears.

>Print HEX-DUMP?

6	Press the ENTER key again. The message
	Processing appears for a second, followed by

Waiting.

Processing

Waiting

7	While the message display is indicating Waiting,
	send data to be hex-dumped to the printer. The
	message display indicates Processing while the
	data is being received.
	You can cancel printing of any more dump data by
	pressing the GO key and then the CANCEL key.
8	Once all data has been received, the message
	Waiting will appear. Press the GO key to finish

hex-dump printing.

3.13.5 Printer Resetting

The procedure described below resets the printer’s temporary conditions, such as the current page orientation, font, etc., set by commands to their default values. Downloaded fonts and macros are deleted from the printer’s memory.

1	Press the MENU key.
2	Press the U or V key repeatedly until Others >
	appears.
		Others	>

3	Press the Z key.
4	Press the U or V key repeatedly until >Printer
	Reset appears.

>Printer Reset

5	To reset the printer, press the ENTER key. A question
	mark (?) appears.

>Printer Reset ?

3-60