Kyocera FS-C8026N Adjusting the Stitch Positions, Duplex Mode ?None, Stitch Adjust, A4/Letter 000

3.10 Paper Handling

5	To activate duplex printing, press the ENTER key. A
	blinking question mark (?) appears.
		>Duplex Mode
6		?None
	Press the U or V key to display the desired binding
	mode. The message display toggles through the
	following:
	None (default)
	Long edge bind
	Short edge bind
7	When the desired binding mode is displayed, press the
	ENTER key. The binding mode is set.
8	To exit the menu selection, press the MENU key.

Note on Duplex Printing from the MP Tray

Duplex printing can be also performed from the multi-purpose (MP) tray. When the MP tray is set to first mode (First), the paper size and paper type will be the same as those of the paper cassette currently set at the paper feed source.

3.10.7Adjusting the Stitch Positions

When installing the option document finisher DF-610 and booklet folder BF-1, adjust the stitch positions using the following procedures. In the default settings, the stitch position is set in the center of the paper. Depending on the paper, a certain amount of deviation will occur. In this case, also use this menu to adjust the stitch position. The adjustment can be done by moving the stitch position adjustment gear in the document finisher.

For example, select the range from -10 to +10 (1 = approximately 0.6 mm) to move the stitch position approximately 6 mm as shown in the following figure. The default setting is 000 (center of the paper.)

Default stitch position (center of the paper)

	Feed direction
	-10	+10
	(Approx. 6 mm)	(Approx. 6 mm)
1	Press the MENU key.
2	Press the U or V key repeatedly until Paper
	Handling > appears.

Paper Handling >

3	Press the Z key. >Stitch Adjust > appears.
		>Stitch Adjust >
4
	Press the Z key. >>A4/Letter appears.
		>>A4/Letter
		000
5
	Press the U or V key to select A4/Letter, B4 or
	A3/Ledger.
6	When the desired paper size is displayed, press the
	ENTER key. A blinking cursor (_) appears under the
	value.
		>>A4/Letter
		00	0

3-52