Kyocera FS-C8026N manual Cover

4.3 Error Messages

Message Corrective Action

Check feed unit

The feed unit of the optional paper feeder is not installed correctly. Open the paper feeder paper cassette and correct the problem. This message appears only when the PF-647 paper feeder is installed on the printer.

	Clean the registration roller or main charger unit and then press the GO key.
Clean printer
press GO	For details about cleaning, 5.3.1 Cleaning the Registration Roller on page
	5-7.
	The cover of the optional document finisher (DF-600/610) is open. Close
Close
	the cover.
finisher cover

Close front cover

The front cover is open. Close the cover.

Close left cover

The left cover of the printer is open. Close the cover.

Close

right cover #

The indicated right cover of paper feeder is open. Covers are indicated by values in place of #, from 1 (topmost) to 3 (bottom). Close the applicable cover.

Duplex disabled	You trying to perform duplex printing while a paper size and/or type that is
	not allowed for duplex printing is selected. Press the GO key to print on one
Press GO
	side of the paper only.
	The duplex drawer of the optional Duplex Unit is not inserted correctly.
Duplex drawer
	Correct the problem and try again.
not loaded
	The face-down tray(which can hold approximately 500 sheets) is full.
Face-down tray
	Remove all printed pages from the face-down tray. The printer will resume
paper full
	printing to the face-down tray when it detects that it is empty.
	The feed unit of the optional paper feeder is not installed. Open the paper
Feed unit
	feeder paper cassette and correct the problem. This message appears only
not loaded
	when the PF-647 paper feeder is installed on the printer.
	The data you are trying to print from a virtual mailbox does not exist, or the
File not found
	virtual mailbox you specified does not exist. If Auto Continue is turned on,
Press GO
	printing will resume resumed after a preset amount of time. For details about
	Auto Continue, refer to 3.10.8 Overriding Difference between A4 and Letter
	on page 3-53

Finisher tray ## paper full

The indicated (##) tray of the optional document finisher (DF-600/610) is full. Remove all printed pages from the tray.

	The optional document finisher (DF-600/610) is not installed properly. Cor-
Finisher
	rect the problem, referring to the instructions supplied with the document
path error
	finisher.
	The memory card in printer's card slot is not formatted. To format a memory
Format error
	card, perform the procedure under Formatting a memory card on page
Memory Card
	3-42.

Format error Hard disk

The hard disk installed in the printer is not formatted. Format the hard disk following the procedure in the hard disk Installation Guide.

Hard disk err ## Press GO

A hard disk error of the type indicated by the error code that appears in place of ## has occurred. Refer to Storage error codes on page 4-11for informa- tion about error codes. To ignore the hard disk error, press the GO key.

Table 4-3 (Continued)

4-7