4026-0XX
Registration Service Check
Note: Use the Service Test Page to check the registration.
| FRU | Action |
|
|
|
1 | Paper | Be sure the paper is correctly installed in the |
|
| paper tray. |
|
|
|
2 | Registration | Perform the registration adjustment when the |
| Adjustment | engine board is replaced. |
|
|
|
Transfer Assembly Service Check
Note: The transfer assembly left and right transfer bracket springs bias the transfer assembly toward the photoconductor unit. Be sure the transfer assembly is free to move and biased toward the photo- conductor unit.
| FRU | Action |
|
|
|
1 | Transfer | Be sure the transfer assembly is correctly |
| Assembly | installed and the left and right transfer brackets |
|
| are properly positioned and fastened. Be sure |
|
| the left and right transfer bracket springs are |
|
| correctly installed and the transfer assembly is |
|
| free to move. |
|
| Check the transfer roll for toner buildup or dam- |
|
| age. Check the transfer roll drive gear for dam- |
|
| age or broken teeth. Check the transfer roll for |
|
| binds or improper operation and the right side |
|
| contact for damage. Replace the transfer |
|
| assembly as necessary. |
|
| Replace the transfer assembly if you have a hor- |
|
| izontal black bar 57 mm from the top of page. |
|
| Check the Transfer Leakage board, wiring, con- |
|
| tacts and transfer roll for signs of damage or |
|
| poor contact. |
|
|
|
