Paper Tray Two selected in the application. Paper does not feed from Tray Two but instead feeds from Tray One. Tray Two reset to Tray One in printer utility.
| FRU | Action |
|
|
|
1 | Engine Board | Be sure the voltage at |
|
| board measures approximately 0 V dc. If incor- |
|
| rect, turn the printer power off and measure the |
|
| resistance between ground and |
|
| the resistance measures 0 ohms. If incorrect, be |
|
| sure the tray two cable measures continuity. If |
|
| incorrect, replace the cable. If correct, replace |
|
| the following FRUs one at a time in the order |
|
| shown: |
|
| Engine Board |
|
| Tray Two Sensor Board |
|
|
|
Diagnostic Information
