LG Electronics AS-W096URH1/UBH1/UWH1/UMH1 service manual Connecting the Cables, Indoor

Installation

ConnectingtheCables

Indoor

Connect the cable to the indoor unit by connecting the wires to the terminals on the control board individually according to the outdoor unit connection. (Ensure that the color of the wires of the outdoor unit and the terminal No. are the same as those of the indoor unit.)

CAUTION:

•The above circuit diagram is subject to change without notice.

•The earth wire should be longer than the common wires.

•When installing, refer to the circuit diagram behind the panel front of the indoor unit.

•Connect the wires firmly so that they may not be pulled out easily.

•Connect the wires according to color codes, referring to the wiring diagram.

CAUTION: If a power plug is not used, provide a circuit breaker between power source and the unit as shown by.

Main power source

Air

Conditioner

Circuit Breaker Use a circuit breake or time delay fuse.

CAUTION: The power cord connected to the "A" unit should be selected according to the following specifications(Type "B" approved by HAR or SAA).

(mm2)

NORMAL CROSS		Grade
	9k		12k
-SECTIONAL AREA
	1.0		1.5
Unit(A)	Indoor		Indoor
Cable Type(B)	H05VV-F		H05VV-F

The power connecting cable connecting the indoor and outdoor unit should be selected according to the following specifications (Type "B" approved by HAR or SAA).

		(mm2)
NORMAL	Grade
CROSS
	9k	12k
-SECTIONAL
	1.0	1.5
AREA
Cable Type(B)	H07RN-F	H07RN-F

(AS-W096/126U_0 Series)

		(mm2)
NORMAL	Grade
CROSS
	9k	12k
-SECTIONAL
	1.5	1.5
AREA
Cable Type(B)	H07RN-F	H07RN-F

(AS-W096/126U_1 Series)

22Room Air Conditioner