Functions

Functions

Indoor Unit

Operation ON/OFF by Remote controller

Sensing the Room Temperature

Room temperature sensor. (Thermistor)

Pipe temperature sensor. (Thermistor)

Room temperature control

• Maintain the room temperature in accordance with the Setting Temp.

Starting the Current Control

• Indoor fan is delayed for 5 sec at the starting.

Time Delay Safety Control

Restarting is for approx. 2 minutes.

Indoor Fan Speed Control

Super High, High, Med, Low

Operation indication Lamps (LED)

--- Lights up in operation

--- Lights up in Sleep Mode

--- Lights up in Timer Mode

--- Lights up in Preheat Mode (for Heating Model) PLASMA --- Lights up in Plasma Air Clean Mode

Soft Dry Operation Mode

• Intermittent Operation of fan at low speed or off.

Sleep Mode Auto Control

The fan is switched to low(Cooling), low(Heating) speed.

The unit will be stopped after 1, 2, 3, 4, 5, 6, 7 hours.

Natural Air Control by CHAOS Logic

The fan is switched to intermittent or irregular operation

The fan speed is automatically switched from high to low speed.

Airflow Direction Control

The louver can be set at the desired position or swing up and down automatically.

Auto Changeover

Energy-Saving control(Optional)

Horizontal airflow Direction Control(Optional)

AUTO CLEAN(Optional)

PLASMA

The function will be operated while in any operation mode with selecting the function.

The function is to be stopped while it is operating with selecting the function.

Defrost(Deice) control (Heating)

Both the indoor and outdoor fan stops during defrosting.

Hot-start Control (Heating)

The indoor fan stops until the evaporator pipe temperature will be reached at 34°C.

Heater (Optional)

30Room Air Conditioner

Page 30
Image 30
LG Electronics AS-W096URH1/UBH1/UWH1/UMH1, AS-W126URH1/UBH1/UWH1/UMH1, AS-W126URH0/UBH0/UWH0/UMH0/UCH0 Functions