Lincoln Electric SVM127-A service manual Wire Loading, Loading and Feeding READI-REELS or Spools

TOC

TOC

B-14		B-14
		OPERATION
	WIRE LOADING	4. Set one of the Readi-Reel inside cage wires on the
		slot in the retaining spring tab.

Return to Section

Return to Section TOC

Return to Master

Return to Master TOC

LOADING AND FEEDING READI-REELS OR SPOOLS

LOADING A 22 TO 30 LB. READI-REEL PACKAGE USING THE MOLDED PLASTIC K363-P TYPE ADAPTER:

1.Make certain that the threaded locking collar is tight and securely locks the adapter on the spindle. See Figure B.5.

2.Rotate the spindle and adapter so that the retain- ing spring is at the 12 o'clock position.

3.Position the Readi-Reel so that it will rotate in a clockwise direction when feeding (wire de-reels from the bottom of the coil).

5.Lower the Readi-Reel to depress the retaining spring and align the other inside cage wires with the grooves in the molded adapter.

6.Slide the cage all the way onto the adapter until the retaining spring "pops up" fully.

WARNING

CHECK TO BE SURE THE RETAINING SPRING HAS FULLY RETURNED TO THE LOCKING POSITION AND HAS SECURELY LOCKED THE READI-REEL CAGE IN PLACE. THE RETAINING SPRING MUST REST ON THE CAGE, NOT THE WELDING ELEC- TRODE.

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

FIGURE B.5 – INSTALLING A 30-LB. READI-REEL PACKAGE

2 IN. O.D. SPINDLE ADAPTER

RETAINING SPRING

BRAKE

HOLDING

PIN

GROOVES

READI-REEL

INSIDE CAGE WIRES	THREADED
	LOCKING
	COLLAR

LN-9 Wire Feeder