SECURE CONSOLE SERVERS | Front Panel Network Setup |
4.4.1.2 Program Network
When you select the Program Network Settings mode, you step through the parameter entry for Network IP Address, Net Mask and Gateway, and Exit to the pre- vious menu. The Up and Down arrows are used to scroll through the available options.
Network IP Address
Figure 4.2 SCS Front Panel Display, for Network Programming mode
Press Enter to
Program Network Settings
Press the ENTER button to continue.
Figure 4.3 SCS Front Panel Display, showing the current IP Address
IP Address 010.009.008.007
The current IP Address will be displayed, shown with leading zeroes. The factory default is 10.9.8.7. If you do nothing, the display will revert to the previous display after 30 seconds, and no changes will be made.
Let’s change the IP Address. Press the ENTER button to continue.
Figure 4.4 SCS Front Panel Display, showing Edit IP Address
Edit IP Address 010.009.008.007
A cursor appears under the first character of the existing address. Press the Left or Right arrow button to move the cursor to the first digit to be changed. To change a digit, use the Up or Down arrows to change the number.
Note
Ignore any leading 0’s in the display entry. The SCS will adjust for them and will not store the leading zeroes when saving the data.
tel (203) | Page 35 | Product Manual - |
