System Administration
7.2.1 Run netconfig
After you establish a connection to the SCS using your network, you may want to change the IP address setting of the SCS to the desired address on your network, using netconfig.
The netconfig script is a
Use the space bar to select / deselect a value (e.g., DHCP). Use the arrow keys to move up and down between the entry fields.
Note
Use of a static IP address is recommended with the SCS.
You will need the following information before running netconfig:
•Using BOOTP/DHCP (yes/no)? If No, you need the following:
•IP Address
•Net Mask
•Default Gateway
•Primary Nameserver
You can add the secondary and tertiary nameservers (if required) by editing your resolv.conf file at a later time. After entering the requested information, you are returned to the root prompt.
SCS160 / SCS320 / SCS480 | Page 54 | www.thinklogical.com |
SCS160R / SCS320R |
|
|
