Initial Configuration
As soon as you change a digit, an asterisk (*) will appear to the right on the top line, indicating that a parameter has changed.
Figure 4.5 SCS Front Panel Display, Asterisk indicating a change
Edit IP Address | * |
192.168.075.239 |
|
|
|
When you have the complete parameter value as it should be, press the ENTER button to complete the entry.
The display will show the following:
Figure 4.6 SCS Front Panel Display, after editing the IP Address
IP Address 192.168.075.239
Your new value will be stored when you are finished setting all the Network param- eters.
Net Mask
Press the Down Arrow once to advance to the Net Mask parameter.
Figure 4.7 SCS Front Panel Display, showing the current Net Mask
Net Mask 255.000.000.000
Press the ENTER button to change the Net Mask parameter. The current Net Mask setting will be displayed, with a cursor under the first digit. The factory default is 255.0.0.0.
Press the Left or Right arrow button to move the cursor to the first digit to be changed. To change a digit, use the Up or Down arrows to change the number.
SCS160 / SCS320 / SCS480 | Page 36 | www.thinklogical.com |
SCS160R / SCS320R |
|
|
