System Administration
5.3 Default Services
The following Services are enabled by default:
•network
•ssh
•syslog
•cron
You may add other features and services, depending on your application. When you first log into the system, you will get a reminder message for configuration:
Figure 5.3 SCS login advice (displayed
To customize the SCS configuration for your location, we suggest you do the following:
* CHANGE THE ROOT | PASSWORD!!! | ||||
* reconfigure the | network | (netconfig) | |||
* | set | the timezone, if not in the Eastern U.S. (timeconfig) | |||
* | add | users | (adduser) |
| |
*edit the ntp.conf file and then enable the ntpd service
For extra security:
*edit the sshd_config file to not allow root logins
*when all settings are changed, reboot the system to save any changes
5.3.1 Configure the Services
To configure the existing features, use the following commands:
For the Network parameters, use netconfig
To change the host and domain name, use changehostname
For the Date/Time, | use timeconfig |
For the authentication protocols, | use authconfig |
SCS160 / SCS320 / SCS480 | Page 44 | www.thinklogical.com |
SCS160R / SCS320R |
|
|
