Marathon Monitors Inc.
Two (2) control output triacs for use in single or dual control mode.
Two (2) fully isolated analog outputs, each separately configurable for voltage or current output.
Two (2) configurable alarm triacs, assignable as process Alarms, deviation alarms, program alarms, or fault alarms.
Four (4) programmer events, assignable in any combination as either inputs or outputs (expandable to 16 I/O with external event boards).
Three (3) communication ports for talking with host computers, controllers, and discrete digital and / or analog event expansion racks.
This manual provides all of the information required to install, operate and maintain the MMI UNIPRO.
The manual is divided into parts: Installation, Setup and Configuration, Operation, Programming, and Maintenance and Troubleshooting. Installation and Setup and Configuration will be used initially to get the instrument into use. Operation and Programming will be used daily. Maintenance and Troubleshooting will be used for servicing the instrument periodically or if trouble occurs.
Unipro 3.5 Process Control | 1 Aug. 1997 |
