MMI Product Documentation
To Exit the Editor Without Saving the Program
1.Press [Setpt ]at any time, the edited program is lost (the copy in
To Exit the Editor Saving the Program
1.Edit through step 19 as required, inserting NOP's wherever no operation is to be executed
2.Press [ENTER]
3.Select the program number in the SET display using the [arrow keys] until the desired program number is being displayed
(SAVE / 0000)
4.Press [ENTER], the program stored in that location previously is now lost (SAVE / Done)
CHANGING PARAMETERS
All of the UNIPRO parameters, program numbers, OPCODES, and data values can be altered using the following procedure:
Press [Pr. Fact. / Ctrl. Param.]. The word MENU will appear in the PROCESS window.
The Parameter group will appear in the SET window. Press [ENTER]. The symbol for the parameter is displayed in the PROCESS window while the current alterable data is shown in the SET window. The flashing character is the one that can be altered.
Use the [LEFT ARROW] or [RIGHT ARROW] keys to select the character to be altered.
Once the character to be changed is flashing, use the [UP ARROW] or [DOWN ARROW] keys to select the desired number or symbol.
Unipro 3.5 Process Control | 1 Aug. 1997 |
