Operation
UNIPRO 3.5
Press the [PROG/AUTO/ MAN] key until the Auto or Man LED is flashing, indicating a program is in HOLD. Return to the program mode by pressing [PROG/AUTO/MAN] and the PROCESS window will display the word HOLd. The SET window indicates the program number that is in hold. Press any of the arrow keys to cancel the program. The hold symbol will be replaced by the run symbol.
Placing a Program in HOLD
1.Press [PROG/AUTO/MAN] UNTIL the instrument is in either Auto or Man mode as indicated by the LEDs. The flashing LED signifies the program is in HOLD.
OR Press [SHIFT]+[LEFT ARROW].
Note If the instrument is in Manual mode and a program is in HOLD, no automatic control is taking place.
If the instrument is in Automatic mode and a program is in HOLD, automatic control is continuing.
Rev. 11.00 December 30,1995
