MMI Product Documentation
DACV2 | (74H) | |
ALRMQ | (75H) | |
HPOUT | (76H) |
PROGRAM RUN BUFFER (30H-45H)
PRUNPRG Program Number
and Step, Remaining Time, First
Through Last Steps of Program
Along With Opcodes, and
Checksum and
PROGRAM EDIT BUFFER (46H-5BH)
PEDPRG Program Number and Step, First Through Last Steps of Program Along With Opcodes, and Checksum and Allow Byte
**Location 91 is not used
SERIAL I/O PROGRAM BUFFER (5CH-71H)
PSIOPRG (50)
Program Number
and Step, First Through
Last Steps of Program
Along With Opcodes, and
Checksum and Allow Byte
*Refer to Appendix A for further information on Hexadecimal Code.
**An Alarm Queue is included in the host communications capabilities of the instruments. The Alarm Queue is simply a block of storage locations for the programmer alarms that occur within the instrument and works similar to the idea of FIFOs (first in, first out). The queue was added because various programmer alarms can occur and be acknowledged and/or corrected before the Host
Unipro 3.5 Process Control | 1 Aug. 1997 |