8399 N/B Maintenance
5. To remove the inverter board on the lower part of the LCD housing , disconnect two cables. (Figure
|
| Document |
| Secret | |
| MiTac |
|
| Figure | |
3. | Replace the LCD assembly.Confidential(Refer to section 2.2.8 Reassembly) | |
Reassembly |
| |
1. | Reconnect the two cables. Fit the inverter board back into place and secure with one screw. | |
2. | Replace the LCD cover and secure with two screws and rubbers. | |
4. | Replace the keyboard and battery pack. (Refer to sections 2.2.2 and 2.2.1 Reassembly) |
61