Mitsubishi Electronics DX-NT400E <MPX DISPLAY SETTINGS

<MPX DISPLAY SETTINGS>

The multiplexer function of this unit allows the connected camera video to be displayed in the splited screen. It is also possible to set the order of the camera number to be

displayed. For basic operations of the multiplexer,see page 22.

■Multiplexer function related to button operations

♦SPLIT/SINGLE, +, and – buttons

Each time you press the SPLIT/SINGLE button, the screen display is switched between the single screen display and split/sequential screen display.

When the +, – button is pressed during single screen dis- play, the camera number can be switched.

When the +, – button is pressed during split/sequential screen display, the screen display is switched between the split screen display and the single sequential screen display.

In the mode except PLAYBACK

Single screen

display of camera number 1

+ or – button		+ or – button	SPLIT		4SPLIT
					screen display
			/SINGLE
Single screen		Single screen	button
display of		display of		+ or – button
camera number 4		camera number 2
+ or – button		+ or – button			Single sequential
					screen display
	Single screen
	display of
	camera number 3

	Single screen display				Split/sequential screen display
	In the PLAYBACK mode
		Single screen
		display of
		camera number 1
+ or – button			+ or – button	SPLIT
				/SINGLE
	Single screen		Single screen	button
						4SPLIT
	display of		display of
	camera number 4		camera number 2			screen display
+ or – button			+ or – button
		Single screen
		display of
		camera number 3
	Single screen display				Split screen display

During playback, the single sequential screen display cannot be selected.

Sequential playback in the single screen display is possible by setting “SEQUENTIAL PLAY” in the <HDD SETTINGS> to “ON.”

The split screen display setting can be set using “SPLIT4 SCREEN SETTING” in the <MPX DISPLAY SETTINGS> screen.

The update speed of the camera video becomes slower as the number of connected camera increases. For smoother video playback, remove unnecessary cameras by setting “PPS” or “A-PPS” in the <RECORD SETTING> screen to “- - - - - -.”

The magnification display function can be set only during single screen display. The centre point moves vertically/horizontally by pressing the JOG buttons.

1.Press the ZOOM button during single screen display.

•X1 appears on the top left of the single screen display and the magnification centre point (X) appears at the centre of the screen.

X1

X

2.To move the magnification centre point vertically or horizontally, press the JOG , ,, buttons.

The position of the magnification centre point is stored even when the display screen is switched or the power is turned off. This is convenient when the point to magnify is determined in advance.

3.Press the ZOOM button.

•Pressing the button switches the magnification in order of X2(200%), X4(400%), normal, and X1(100%).

X2

X4

The magnification function can also be used during playback.

INFORMATION

During playback of the video recorded by multiple cameras in the single screen display, a black screen may appear when pausing the playback and display the magnified screen. In this case press the JOG ,buttons to advance the image frame by frame,

then the magnified screen appears.

♦ZOOM and JOG buttons

When the ZOOM button is pressed during single screen display, magnification 100% screen appears and the magnification centre point (X) is displayed at the centre of the screen. Pressing the button again switches the magnification to 200%, and then 400%.

INFORMATION

The magnification display function of this unit uses digital magnification and screen details may appear pixelized when magnifying.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

36