Major operations and their functions

■Front view

1

2

DIGITAL RECORDER DX-NT400

LOCK

POWER

REMOTE

ALARM

 

 

ACCESS

REC INTERRUPT WARNING LINK

RX/TX

3

4

5

6

7

8

9

10 11

1. HDD tray

9. WARNING indicator

Attach the HDD which is commercially available to here. Due to the removable structure, you can attach or remove the HDD easily.

Illuminates when a warning is displayed on the monitor. To clear the warning display, press the WARNING RESET button for more than 3 seconds.

2.Key

Used to lock the HDD tray. The HDD tray cannot be removed while it is locked.

10.LINK indicator

Illuminates when the link between this unit and the device connected to ETHERNET terminal is fixed.

3.POWER button

When pressing this button while the MAIN switch on the rear panel is set to ON, the power turns on and the button lights up. When pressing the button again, the unit is in standby mode and the light turns off. When the unit is in operational transition such as boot-up, the button flashes and other operations are not accepted.

11.RX/TX indicator

Illuminates while communicating with the device connected to ETHERNET terminal on the rear panel.

4.REMOTE jack

Input connector for supplied wired remote control.

5.Lever

Used when attaching or removing the HDD tray.

6.ACCESS indicator

Illuminates while accessing the HDD.

7.REC indicator

Illuminates while recording.

8.ALARM INTERRUPT indicator

When pressingALARM INTERRUPT button, the unit does not accept alarm signals or motion detection for 5 minutes. During this time, the indicator flashes.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

8