When executing complex playback operations with the PLAY or REV.P button during alteration check, the “IMAGE MODIFIED” warning may appear. Execute alteration check during normal playback.
IMAGE MODIFIED( 1 2 3 )
■AUDIO RECORDING
This item is used to simultaneously record audio along with the video. When recording audio, the continuous recording time becomes shorter than when recording only video.
<INITIAL SET UP/INFORMATION> HDD SETTINGS
>>AUDIO RECORDINGOFF REAR TERMINAL SETTINGS COMMUNICATION PORT SETTINGS INFORMATION/SERVICE PASSWORD
LANGUAGE SELECTION
♦SEQUENTIAL PLAY
This item is used to make backups of the video recorded with this unit to an analog video recorder etc. while playing back the video of each camera in the single screen display. The playback order and time of each camera will be the order of the recorded video.
<HDD | SETTINGS> | ON |
HDD | REPEAT REC MAIN | |
HDD | REPEAT REC SUB | OFF |
HDD REPEAT PLAY | OFF | |
OFF | ||
>>SEQUENTIAL PLAY | OFF | |
Setting (default: “OFF”)
“ON”: Executes the sequential playback in the single screen display.
“OFF”: Does not execute the sequential playback in the single screen display.
Sequential playback is executed at a playback interval of 25P.
1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “SEQUENTIAL PLAY” in the <HDD SETTINGS> screen. Display the desired setting and determine such setting.
2.Press the CLEAR button or the SET UP button.
3.Press the PLAY button.
4.Press the SPLIT/SINGLE button to display the single screen display and then press the +, – button to display the recorded video.
•Sequential playback in the single screen display starts.
When performing sequential playback for video with long recording intervals, the video of the highest camera number selected for recording is played back for the longest time.
Setting (default: “OFF”)
“ON”: Records video and audio.
“ALARM”: Records video and audio during alarm recording and emergency recording.
“OFF”: Does not record audio.
1.Press the SET UP button }<SETTINGS> }Select “AUDIO RECORDING” in the <INITIAL SET UP/INFORMATION> screen. Display the desired setting and determine such setting.
2.Press the CLEAR button or the SET UP button.
When setting “AUDIO RECORDING” to “ON,” a speaker display (
) appears next to <ESTD REC> in the <RECORD SETTING> and <REC MODE A> to <REC MODE D> screens.
Even when setting “AUDIO RECORDING” to “ON,” audio cannot be recorded under the following settings.
•Audio recording cannot be performed when “PPS” of “RECORD SETTING” for normal recording are all set to the value smaller than “0.333P.”
In this case, (
X) appears to the right of <ESTD REC>.
•When the “ALARM TYPE” during alarm recording is set as follows:
“ALARM CH”:
“ALARM PLUS”: “PPS” and
The recorded audio may be interrupted while playback depending on the recording settings.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
48