<RECORD SETTINGS>
■Settings concerning normal recording and alarm recording
This unit allows you to set the setting items for normal recording and alarm recoding individually. It means, more detailed settings are possible, such as changing the recording intervals of the camera which inputs the alarm signals while leaving the normal recording settings as they are.
Some settings and mode are limited to change during alarm recording. Pressing the ALARM INTERRUPT button halts additional alarm input and stops recording.
While recording, the setting in the <RECORD SETTING> screen cannot be changed.
When setting the camera number of which the camera is not connected in <RECORD SETTING>, warning display of “NO SIGNAL” appears (
see “Warnings and CALL OUT output” on page 81).
■Recording mode settings for normal recording and alarm recording
Setting the following items:
•The recording camera and trigger for alarm recording (<ALARM SETTING>)
•The camera selection during alarm recording (“ALARM TYPE” in <ALARM SETTING> or <RECORD SETTING>)
•Recording intervals and recording picture quality for nor- mal recording and alarm recording (<RECORD SETTING>)
•Whether to execute
alarm recording, 
see page 61).
<RECORD | SETTINGS> |
|
>>ALARM | SETTING |
|
RECORD | SETTING | 5S |
ALARM | REC DURATION |
♦ALARM SETTING
This menu is used to set the recording camera and trigger for alarm recording.
|
|
|
|
<ALARM | SETTING> | TRIGGER | |
ALARM | RECORD CAMERA | ||
>>1 | 1 | EXT | |
2 | EXT | ||
3 | EXT | ||
4 | EXT | ||
EMR | 1 2 3 4 |
|
|
TYPE | ALARM CH | ||
ALARM | |||
|
|
| |
CLEAR:BACK |
| ||
| |||
1.Press the SET UP button } <SETTINGS> } Select “ALARM SETTING” in the <RECORD SETTINGS> screen and then press the ENTER button.
•The <ALARM SETTING> screen appears.
2.(When setting the camera number and trigger for the alarm recording • • • )
Press the JOG 
,
buttons to select the number for setting the camera number and then press the ENTER button.
•The leftmost setting item of “RECORD CAMERA” is highlighted.
•The camera numbers are lined in order of the number from
“ 1 ” to “ 4 .”
3.Press the JOG 
,
buttons to highlight the desired camera number and then press the ENTER button.
•The background of the camera number turns red and flashes.
The menu screen is not cleared even when pressing the SET UP button while the setting item is flashing.
4.Press the JOG 
,
buttons to display the desired setting and then press the ENTER button.
•The setting item is determined and flashing stops.
5.Press the JOG 
button to highlight the setting item of “TRIGGER” and then press the ENTER button.
•The background of the setting item turns red and flashes.
6.Press the JOG 
,
buttons to select the desired setting and then press the ENTER button.
•The setting item is determined and flashing stops.
Setting of “TRIGGER” (default: “EXT”)
“EXT”: Starts alarm recording only when the ALARM IN terminal is grounded.
“MD&EXT”: Starts alarm recording when theALARM IN terminal is grounded and the motion is detected simultaneously.
“MD/EXT”: Starts alarm recording when the ALARM IN terminal is grounded or the motion is detected.
“MD”: Starts alarm recording only when the motion is detected.
When you set the “TRIGGER” to MD&EXT, MD/ EXT, or MD, the motion detection function is active immediately and any setting changes cannot be accepted. To change the setting, clearing the menu screen first and then press the ALARM INTERRUPT button.
7.When the settings are completed, press the CLEAR button.
•The cursor reappears to the left side of the number.
•To continue with other numbers, press the JOG buttons to move the cursor to the desired number and repeat steps 4 to 7.
8.Press the CLEAR button or the SET UP button.
ENGLISH
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
41