<INITIAL SET UP/INFORMATION>

■HDD SETTINGS

♦HDD REPEAT REC MAIN/HDD REPEAT REC SUB

This item is used to set the operation when HDD space becomes full during recording.

<HDD

SETTINGS>￿

ON￿

>>HDD

REPEAT

REC MAIN

HDD

REPEAT

REC SUB

OFF￿

HDD REPEAT PLAY

OFF￿

IM-CHECK PLAY

OFF￿

SEQUENTIAL PLAY

OFF

“HDD REPEAT REC SUB” appears when “HDD SETTING” in <INITIALIZATION> screen is set to “PARTITION.”

Setting (default of HDD REPEAT REC MAIN: “ON,”

default of HDD REPEAT REC SUB: “OFF”)

“ON”: Automatically returns to the beginning of the HDD and resumes recording (by overwriting the existing data).

♦HDD REPEAT PLAY

This item is used to playback the recorded contents of the HDD repeatedly.

<HDD

SETTINGS>￿

ON￿

HDD

REPEAT REC MAIN

HDD

REPEAT REC SUB

OFF￿

>>HDD

REPEAT PLAY

OFF￿

IM-CHECK PLAY

OFF￿

SEQUENTIAL PLAY

OFF

Setting (default: “OFF”)

“ON”: Automatically resumes playback from the beginning of the recorded data when the recorded data is played back to the end.

“OFF”: Stops playback when the recorded data is played back to the end.

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “HDD REPEAT PLAY” in the <HDD SETTINGS> screen. Display the desired setting and determine such setting.

2.Press the CLEAR button or the SET UP button.

ENGLISH

“STANDBY”: Stops recording and switches to the standby mode. Recording resumes when both REC/ STOP buttons are pressed. Recording pauses when the alarm input is continuously grounded or during timer recording, then, recording resumes from the beginning of the HDD.

“OFF”: Stops recording and “REC/FULL” or “REC/ SUB FULL” appears on the screen. To resume recording, press and hold the WARNING RESET button for more than 3 seconds to clear the “REC/ FULL” or “REC/SUB FULL” display and then press both REC/STOP buttons.

When an error occurs to one HDD and another HDD does not affected by this error, the recording continues with another HDD.

“STANDBY” is displayed only in “HDD REPEAT REC MAIN.”

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “HDD REPEAT REC MAIN” or “HDD REPEAT REC SUB” in the <HDD SETTINGS> screen. Display the desired setting and determine such setting.

2.Press the CLEAR button or the SET UP button.

♦IM-CHECK PLAY

This item is used to check whether the recorded video or the recording date/time is altered.

<HDD

SETTINGS>￿

ON￿

HDD

REPEAT REC MAIN

HDD

REPEAT REC SUB

OFF￿

HDD REPEAT PLAY

OFF￿

>>IM-CHECK PLAY

OFF￿

SEQUENTIAL PLAY

OFF

Setting (default: “OFF”)

“ON”: Executes alteration check during playback and displays a warning at the point of alteration.

“OFF”: Does not execute alteration check.

This function may cause problems during recording and playback. Normally, set this function to “OFF.”

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “IM-CHECK PLAY” in the <HDD SETTINGS> screen. Display the desired setting and determine such setting.

2.Press the CLEAR button or the SET UP button.

3.Select the HDD to execute alteration check and then start playback.

Warning is also displayed for the portion where the recorded data is damaged for some reason.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

47