7.Press the JOG button to highlight the setting item of “hour” of the start time and then press the ENTER button.

•The background of the setting item turns red and flashes.

8. Press the JOG ,buttons to display “12” and then press the ENTER button.

•The setting item is determined and flashing stops.

9.Repeat steps 7 and 8 to set “30” in “minutes” of the start time, and “13” in “hour” and “00” in “minutes” of the end time, and then determine such setting.

10.Press the JOG button to highlight the setting item of “MODE” and then press the ENTER button.

•The background of the setting item turns red and flashes.

11. Press the JOG ,buttons to display “A” and then press the ENTER button.

•The setting item is determined and flashing stops.

12.Press the JOG button to highlight the setting item of “MD” and press the ENTER button.

•The background of the setting item turns red and flashes.

18.Press the JOGbutton to highlight the end day and then press the ENTER button.

•The background of the end day setting turns red and flashes.

19. Press the JOG ,buttons to display “SAT” and then press the ENTER button.

• The setting item is determined and flashing stops.

 

 

 

 

 

 

<TIMER PROGRAM>

 

P2￿

>>1

DW

START END MODE

MD￿

SPL

12:30 13:00 A

ON￿

2

---

--:-- --

:-- ----

-￿

3

---

--:-- --

:-- ----

-￿

4

---

--:-- --

:-- ----

-￿

5

---

--:-- --

:-- ----

-￿

6

---

--:-- --

:-- ----

-￿

7

---

--:-- --

:-- ----

-￿

8

---

--:-- --

:-- ----

-￿

￿

 

WED-SAT

 

 

 

SPL

 

 

 

20.Press the CLEAR button or the SET UP button.

•Press the CLEAR button to return the cursor on the left side of “SPL.”

•Press the SET UP button to clear the <TIMER PROGRAM> screen and return to the normal screen.

ENGLISH

13. Press the JOG ,buttons to display “ON” and then press the ENTER button.

•The setting item is determined and flashing stops.

14.Press the CLEAR button.

•The cursor reappears on the left side of the program number.

15.(When programming other timer recording in other program number • • •)

Press the JOG , buttons to select the desired program number and then press the ENTER button twice. Then repeat steps 6 to 14.

16. Press the JOG ,buttons to select “SPL” and then press the ENTER button twice.

•The “start day” display is highlighted when the ENTER button is pressed once. When the button is pressed again, the background turns red and flashes.

17. Press the JOG , buttons to display “WED” and then press the ENTER button.

•The setting item is determined and flashing stops.

INFORMATION

If there is an unset item in the program (- - -

display), the setting screen can not be exited even when pressing the CLEAR button. In this case, set all the unset items.

21.Press both the TIMER ON/OFF buttons.

•Timer recording starts when the present time is within the programmed recording period.

•The power turns off and the unit is in the timer recording standby mode when the present time is not within the programmed recording period.

•Timer recording/timer recording standby mode can be cancelled by pressing both the TIMER ON/OFF buttons again.

TIMER ON/OFF buttons do not function during alarm recording.

To erase programmed contents or to exit the program without completing the settings, press and hold the WARNING RESET button for more than 3 seconds.

Recording is not performed if there is an error in the setting. To prevent such errors for timer recording, this unit notifies errors using methods shown below. If there is an error in the setting, take the necessary procedures shown below.

Unit status

Description of error

 

Countermeasure

Page

 

 

 

 

 

"TIMER" display flashes

1) The date/time is not set.

1)

Set the date/time.

24

on the screen and the

2) Timer program setting

2)

Set the correct program.

44, 45

series of short beeps

has not been set to operate.

 

 

 

(beep-beep-beep) sounds.

3) Program is currently being set.

3)

Determine the settings.

44, 45

 

 

 

 

Timer recording does

1) "HDD REPEAT REC MAIN" in

• Press and hold the WARNING RESET

 

not perform even when

<HDD SETTINGS> is set to

button to clear the warning display.

 

the programmed

"OFF" or "STANDBY," or "HDD

• Set the "HDD REPEAT REC MAIN" in

47

time is reached.

REPEAT REC SUB" in <HDD

<HDD SETTINGS> to "ON," and set the

 

 

SETTINGS> is set to "OFF."

"HDD REPEAT REC SUB" in <HDD

 

 

2) There is no HDD space left.

SETTINGS> to "OFF."

 

 

 

• Press the REC/STOP buttons when

 

 

 

"HDD REPEAT REC MAIN" in

 

 

 

<HDD SETTINGS> is set to "STANDBY."

 

 

 

 

 

 

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

45