<INITIAL SET UP/INFORMATION> (continued)

To register the PASSWORD • • •

Register a 4-digit number for PASSWORD. When setting the number of each digit, choose the number from 0 to 9.

1.Press the SET UP button } <SETTINGS> } Select “PASSWORD” in the <INITIAL SET UP/INFORMATION> screen. Press the ENTER button.

•The <PASSWORD> screen appears.

<PASSWORD>￿

>>OPERATION CONTROL￿ HDD DATA CLEAR

2-1. (When registering the PASSWORD for OPERATION CONTROL (levels 1 to 3) • • • )

Confirm that the cursor is positioned at “OPERATION CONTROL” and then press the ENTER button.

• The <PASSWORD SETTING> (levels 1 to 3) screen appears.

<PASSWORD SETTING>￿

￿

FIRST

SECOND￿

>>1

----

----￿

￿

----

----￿

2

￿

----

----

3

2-2. Confirm that the cursor is positioned on the left side of level “1” and then press the ENTER button.

• The first input position of “FIRST” is highlighted and flashes.

<PASSWORD SETTING>￿

￿

FIRST

SECOND￿

1

-

---

----￿

￿

----

----￿

2

￿

----

----

3

2-3. Input 4 digits of the PASSWORD by pressing the number buttons.

• 1: SPLIT/SINGLE button

• 2: + button

• 3: JOG

button

• 4: JOG

button

• 5: JOG

button

• 6: – button

• 7: CLEAR button

• 8: JOG

button

• 9: ENTER button

• 0: SEARCH button

• The first input position of “SECOND” is highlighted.

2-4. Input the same PASSWORD entered in “FIRST.”

•The cursor reappears to the left side of the setting of level

1.

<PASSWORD SETTING>￿

￿

FIRST

SECOND￿

>>1

 

 

￿

----

----￿

2

￿

----

----

3

Input the same number in “FIRST” and “SECOND.” The setting returns to step 2-1 when the different PASSWORD number is input.

2-5. Press the JOG , buttons to move the cursor to the left side of level 2 and press the ENTER.

2-6. Repeat steps 2-3 to 2-5 to set levels 2 and 3.

It is not necessary to input the PASSWORD for all the levels, 1 to 3. Input the PASSWORD for the desired level only.

2-7. Press the CLEAR button.

3-1. (When registering the PASSWORD for HDD DATA CLEAR (level 4) • • • )

Press the JOG ,buttons to move the cursor to “HDD DATA CLEAR” and then press the ENTER button.

• The <PASSWORD SETTING> (level 4) screen appears.

<PASSWORD SETTING>￿

￿

FIRST SECOND￿

>>4 ---- ----￿

￿

3-2. Repeat steps 2-2 to 2-4 to set level 4.

4. Press the CLEAR button or SET UP button.

To activate the PASSWORD LOCK • • •

1.Press and hold the LOCK button for more than 3 seconds while the MAIN switch is set to ON.

•The PASSWORD LOCK turns on. “LOCK” displays on the screen when “DUPLEX MODE DISPLAY” in <TIME DATE/ DISPLAY SETTINGS> screen is set to “TOP” or “BOTTOM.”

To release the PASSWORD LOCK • • •

1.(To release the PASSWORD LOCK of levels 1 and 2 • • • ) Press and hold the LOCK button for more than 3 seconds.

•The <UNLOCK PASSWORD> (levels 1 and 2) screen appears.

<UNLOCK PASSWORD>￿

￿

￿

>>1 ----￿

￿

2----￿

￿

EXECUTE

2.Confirm that the cursor is positioned on the left side of level “1” and then press the ENTER button.

•The first input position is highlighted.

3.Input the PASSWORD of level 1 by pressing the number buttons.

•The cursor reappears to the left side of the setting of level

1.

Be sure to input the PASSWORD correctly. When you input the incorrect PASSWORD, repeat steps 2 and 3 to input again.

4.Press the JOG , buttons to select the level “2” and then press the ENTER button.

•The first input position is highlighted.

5.Input the PASSWORD of level 2 by pressing the number buttons.

•The cursor reappears to the left side of the setting of level

2.

When the PASSWORD LOCK of levels 1 and 2 are set and then unlock level 1, the PASSWORD LOCK of level 2 is still active.

When the PASSWORD LOCK of levels 1 and 2 are set, you cannot unlock only level 2. Unlock level 1 also.

Be sure to input the PASSWORD correctly. When you input the incorrect PASSWORD, repeat steps 4 and 5 to input again.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

56