<INITIAL SET UP/INFORMATION> (continued)

■INFORMATION/SERVICE

This menu is used to check the log list or list of power failures, etc., and to initialize the menus.

At the bottom of the screen, the following information appears.

•The accumulated operation time since the beginning of usage (“ELAPSED TIME”)

•The HDD setting of MIRRORING, PARTITION, or NORMAL mode (“HDD SETTING” and “PARTITION SIZE”)

<INFORMATION/SERVICE>￿

>>HDD INFORMATION￿

 

WARNING LOG LIST￿

 

RESET TO FACTORY SETTINGS￿

MAIN HDD DATA CLEAR￿

SUB HDD DATA CLEAR￿

￿

￿

￿

 

￿

6H￿

ELAPSED TIME:

HDD SETTING

PARTITION￿

PARTITION SIZE

10%

“SUB HDD DATA CLEAR” and “PARTITION SIZE” appear when “HDD SETTING” in <INITIALI- ZATION> screen is set to “PARTITION.”

♦HDD INFORMATION

This menu is used to check the recorded range of the HDD.

<HDD INFORMATION>￿

￿

A:HDD(120GB)￿

B:HDD(120GB)￿

￿

￿

￿

￿

MAIN START 02-02-2003 00:00:00￿

END 04-04-2003 00:00:00￿

SUB START 02-02-2003 00:00:00￿

END 04-04-2003 00:00:00

Recording start and end times of “SUB” HDD appear when “HDD SETTING” in <INITIALIZATION> screen is set to “PARTITION.”

1. (To check the recorded range of the HDD • • • )

Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “HDD INFORMATION” in the <INFORMATION/SERVICE> screen. Display the desired setting and determine such setting.

2. Press the CLEAR button or the SET UP button.

♦WARNING LOG LIST

This menu is used to check the number, date, time, and type of failures.

<WARNING LOG

LIST>￿

WARNING￿

NO

DATE

TIME

>>0003

04-03-03

15:03:27

P-LOSS￿

0002

26-02-03

09:56:43

ALM ON￿

0001

02-02-03

10:00:00

ALM OFF

The failures displayed in the WARNING LOG LIST: ( see page 81).

“P-LOSS”: Power failure.

“SYS RST”: Reset button is pressed and the unit is reset.

“ALM OFF”: ALARM INTERRUPT button is pressed and the unit is put on interruption.

“ALM ON”: Alarm interrupt is cancelled manually by pressing ALARM INTERRUPT button. Alarm interrupt is cancelled automatically after 5 minutes from the start of interruption.

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “WARNING LOG LIST” in the <INFORMATION/SERVICE> screen. Press the ENTER button.

•The <WARNING LOG LIST> screen appears.

•The WARNING LOG LIST displays up to 1000 items. When the number of items exceeds this limit, the latest 1000 items are displayed.

•JOG button : Selection moves to the next number.

•JOG button : Selection moves to the previous number.

•JOG button : Displays the page with date prior to the date of the currently opened page.

•JOG button : Displays the page with date newer than the date of the currently opened page.

When a failure occurs while the <WARNING LOG LIST> screen is displayed, exit the screen and display the screen again. A new item will be added to the list.

2. Press the CLEAR button or the SET UP button.

♦RESET TO FACTORY SETTINGS

This menu is used to initialize menu screen settings.

<RESET TO FACTORY SETTINGS>￿

￿

￿

>>EXECUTE￿

￿

￿

￿

￿

￿

￿

￿

ENTER:EXECUTE,CLEAR:CANCEL

1.Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “RESET TO FACTORY SETTINGS” in the <INFORMATION/SERVICE> screen. Press the ENTER button.

•The <RESET TO FACTORY SETTINGS> screen appears.

•When cancelling the intialization of the menu screen settings, press the CLEAR button.

2.Press the ENTER button.

•The menu screen settings are initialized.

3.Press the CLEAR button or the SET UP button.

The setting of present time, password, and timer program are not reset.

When you execute RESET TO FACTORY SETTINGS with the setting of IPADDRESS, SUB NET MASK, GATEWAY, SERVICE PORT SETTING in <ETHERNET> screen or IP ADDRESS, TARGET, OWN in <ALARM NOTIFICATION SETTING> screen changed, the power turns off and the unit boots-up.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

54