Turn on the printer and make sure it is ready to receive data before you download. See your host’s documentation, system administrator, or "Downloading Methods" for information on ways to download.

When downloading, send your packets in this order:

1.Memory configuration packet (M)

2.Configuration packets (A-G)

3.Any of the following:

Check digit packets (see Chapter 4)

Format packets (see Chapter 3)

Graphic packets (see Chapter 5)

4.Batch data (see "Defining the Batch Header")

To download from a PC:

1.Check that the PC and the printer are connected.

2.Check that communications have been established between the PC and the printer.

3.Send the communication settings packet to select the printer’s communication settings. See "Defining the Communication Settings Packet" in Chapter 2 for more information (only used for serial communication). If you change the printer’s communication settings, make sure they match those at the host before sending any packets to the printer.

4.Type this command at the DOS prompt:

COPY LABEL1.FMT COM1 Transmits a file called "LABEL1.FMT" to COM1.

COPY LABEL1.BCH COM1 Transmits a batch called "LABEL1.BCH" to COM1.

6-2Printing

Page 144
Image 144
Monarch 9835, 9805, 9820, 9830 manual