S c a l a b l e / Tr u e Ty p e ® F o n t I n f o r m a t i o n

The scalable font characters print smoothly, without the jagged edges you may see when bitmapped fonts are magnified. Scalable/TrueType fonts are proportionally spaced (field width varies with each letter).

F o r m a t C o n s i d e r a t i o n s

When defining formats with scalable/TrueType fonts, keep the following in mind:

While field rotation can be set to any value (0-3), character rotation must be set to 0.

The slashed zero is not available.

The minimum point size for all scalable/TrueType fonts is 4.

The maximum point size for Font 50-CG Triumvirate Bold is 90. The maximum point size for Font 50-EFF Swiss Bold and downloadable TrueType fonts is 250.

Field color (O-transparent overlay) allows closer field placement (fields can overlap) without the loss of data.

To use large point sizes (greater than 60), you must reconfigure memory and increase the size of the scalable (vector) fonts buffer.

The height and width magnification are defined in point size. 72 points = one inch. One inch = cell size. The cell size is the built-in space around the individual characters of the scalable font. If height and width magnification are not set to the same point size, the printed characters look tall and thin or short and thick, which allows for greater flexibility in the appearance of the font.

The scalable font (font 50) is not available on

the 9403, 9805, or 9820 printers.

Fonts B-19

Page 231
Image 231
Monarch 9830, 9835, 9805 A l a b l e / Tr u e Ty p e F o n t I n f o r m a t i o n, R m a t C o n s i d e r a t i o n s