NOTE: The CG Triumvirate fonts and font 50 support only the ANSI and DOS Code 437 and 850 Page Symbol Sets. See Appendix C for more information.

Code pages 4 - 16 may only be used with downloaded TrueType fonts or the resident TrueType font, font 50. TrueType fonts are designed to be regionally specific; therefore, all code pages may not be supported in a given font.

Example {I,A,0,0,1,1,0 p }

Powers up the printer in the online mode, displays prompts in English, prints a separator after each batch, prints zeros with slashes through them, and uses the internal symbol set.

D e f i n i n g t h e S u p p l y S e t u p P a c k e t

Use the supply setup packet (B) to select supply type, ribbon, feed mode, supply position, and cut position.

Syntax {I,B,supply_type,ribbon_on,feed_mode,

supply_posn,cut_posn p}

B1. B

Supply Setup Packet

B2. supply_type Supply Type. Options:

0Black mark supply (9403/9820/9830/9835/9840

9850)

1Die Cut/edge aperture supply (default- all printers)

2 Non-indexed supply (9820/9830/9835/9840/9850)

3 Center Aperture supply (9835 V5.2+, 9840, or 9850 only) Must use with printer applicator

NOTE: You must use non-indexed supply in continuous mode. Do not use non-indexed (continuous) supply with extended backfeed or 94x5 emulation. If your aperture supply has holes on the edge, use 1. If your aperture supply has holes in the center, use 3.

2-12Configuring the Printer

Page 36
Image 36
Monarch 9835 F i n i n g t h e S u p p l y S e t u p P a c k e t, 12Configuring the Printer, B1. B Supply Setup Packet