411Framing error. The printer cannot communicate with the host. Make sure the host is turned on, communication cables are connected correctly, port settings are correct, and communications are active. Check the baud rate, word length, and stop bits to make sure they match those at the host. Do not toggle between Microsoft® Windows® and MS-DOS, while using the COPY command, or you will receive a framing error. Exit Windows before using the COPY command. Re-transmit the data.

412There is a problem with flow control between the printer and the host. Make sure the printer and the host flow control settings match (both are DTR or both are XON/XOFF). If the error persists, call Technical Support.

413Online receive queue is full. Check your printer’s XON/XOFF or DTR SETUP values to be sure there isn’t a flow control problem.

414The internal keyboard buffer is full or you need a new keypad. Call Technical Support.

415The buffer size you defined exceeds the total available in your machine.

416Flash/PC board error. Call Technical Support.

417Flash memory is full. Clear flash through the 9403 printer’s menu. Resend the format, graphic, and check digit packets. If the error reappears, call Technical Support.

420Internal software list error. Call Technical Support.

421Internal software list error. Call Technical Support.

422Duplicate internal name. Call Technical Support.

423Internal software list error. Call Technical Support.

424Internal software list error. Call Technical Support.

Diagnostics and Errors 8-17

Page 183
Image 183
Monarch 9830, 9835, 9805, 9820 manual