Make a copy of the online configuration worksheet in Appendix D, "Format Design Tools," and save the original. Packets A-M are listed on the worksheet.

When you turn off the printer, all the information in the online configuration packets is saved and used when the printer is turned back on. After you change printer configurations, you must resend the format, batch, or graphic to the printer before the changes take effect.

C o n f i g u r a t i o n P a c k e t H e a d e r

Always include an I, immediately after the left bracket { and before the packet identifier (A, B, C, etc.). The I parameter identifies the data stream as a configuration packet.

Include the I parameter with each packet if you are sending them individually. Include it only at the beginning of a data stream if you are sending multiple packets.

This is the syntax to use when you create online configuration packets:

Syntax

{

Start of Header

I,

Configuration Header

1 to 8 optional packets

 

A, parameter 1...parameter 5 p

System Setup

B, parameter 1...parameter 5 p

Supply Setup

C, parameter 1...parameter 5 p

Print Control

D, parameter 1...parameter 3 p

Monetary Formatting

E, parameter 1...parameter 9 p

Control Characters

F, parameter 1...parameter 5 p

Communication Settings

G, parameter 1...parameter 4 p

Backfeed Control

M, parameter 1...parameter 4 p

Memory Configuration

}

End of Header

Configuring the Printer 2-7

Page 31
Image 31
Monarch 9830, 9835, 9805, 9820 manual N f i g u r a t i o n P a c k e t H e a d e r, Syntax