ATTO Technology 2700C Serial port configuration commands, SerialPortBaudRate, SerialPortEcho

6.1.5 Serial port configuration commands

The ATTO iPBridgeserial ports or serial headers are configured with default settings but may be customized to your specifications using the CLI commands in this section.

SerialPortBaudRate

Configures/reports the baud rate for the iPBridge RS-232 serial port or serial header. The number of data bits per character is fixed at 8 with no parity. Choices are 2400, 9600, 19200, 38400, 57600 and 115200.

Default: 115200

Set syntax: set SerialPortBaudRate [2400 9600 19200 38400 57600 115200]

Requires a SaveConfiguration command Get syntax: get SerialPortBaudRate

SerialPortEcho

Enables/disables/reports the echoing of keyboard input. When enabled, all non-control character keyboard input is output to the display.Local ASCII terminal (or terminal emulator) echo settings should be set to disabled while using SerialPortEcho enabled

Default: enabled

Set syntax: set SerialPortEcho [enabled disabled] Requires a SaveConfiguration Restart command Get syntax: get SerialPortEcho

TailEventLog

Displays new events to the terminal during a serial or

Telnet session. Press <ESC> to exit tail mode.

Immediate command: TailEventLog

47

ATTO Technology Inc. iPBridge Installation and Operation Manual