General use commands | ATTO Technology 2700C

6.1.2 General use commands

These CLI commands are used in a variety of situations

Help

Displays a list of available commands. If command name is specified, displays detailed command- specific information.

Immediate command: Help [command name]

Password

Specifies a password for all sessions: TCP/IP, FTP and ExpressNAV web-based interface. You will be prompted for the current password, to enter the new password, and to confirm the new password. Passwords are case sensitive, 0-32 characters with no spaces.An empty password can be configured by entering the Password confirmation prompts with no parameters. The command RestoreConfiguration default sets the password to its default value.

Default: Password

Set syntax: set Password

Requires a SaveConfiguration command

ReadOnlyPassword

Specifies a read only password for all sessions: TCP/IP, FTP and ExpressNAV web-based interface. You will be prompted for the current password, to enter the new password, and to confirm the new password. Passwords are case sensitive, 0-32 characters with no spaces.An empty password can be configured by entering the Password confirmation prompts with no parameters. The command RestoreConfiguration default sets the password to its default value.

Default: Password

Set syntax: set ReadOnlyPassword Requires a SaveConfiguration command

ReadOnlyUsername

Specifies a read only username for all TCP/IP, FTP and ExpressNAV web server sessions. Username is case insensitive, 1-32 characters with no spaces.

Default: user

Set syntax: set ReadOnlyUsername [username] Requires a SaveConfiguration command

Get syntax: get ReadOnlyUsername

RestoreConfiguration

Restores configuration to either the default configuration or the configuration last saved into non-volatile memory. The saved option will undo any changes made since the last save.

Immediate command: RestoreConfiguration [Default Saved]

SaveConfiguration

Many commands require a SaveConfiguration command to be executed. This will be indicated by the return Ready. *.

When you invoke SaveConfiguration, the current configuration is permanently saved in the iPBridge and the new configuration becomes the active configuration.

If a firmware restart is required to make the requested change permanent, you will see a prompt asking you to confirm the restart. You can override this request by indicating the override value on the command line.

You may make several changes through commands and SaveConfiguration before implementing the restart, but once you have restarted the iPBridge, all the command changes created before the restart and save will be implemented. If you select the restart option, the iPBridge will execute its complete start up cycle.

Restart or no Restart parameter is optional

Immediate command: SaveConfiguration <Restart NoRestart>

ATTO Technology 2700C operation manual General use commands

Models: 2700C