TroubleshootingSymptom Charts/Peripheral - 15
Peripheral
After you connect | 1 | Switch on external SCSI device before starting up computer. |
external SCSI device, | 2 | Verify that Apple |
computer no longer | 3 | computer and external SCSI device(s). |
boots | Verify that cable termination is correct. | |
| 4 | Verify that no SCSI devices have same device address. |
| 5 | Replace motherboard. |
| 6 | Replace daughterboard. |
Cursor does not move | 1 | Reset computer. |
when you move | 2 | Verify |
trackball | 3 | Replace trackball assembly. |
| 4 | Replace daughterboard. |
| 5 | Replace motherboard. |
