SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOLMEANING

SYMBOL

MEANING

 

• SAFETY ALERT SYMBOL

 

 

 

• IGNITION SWITCH

 

 

 

 

 

Indicates danger, warning, or

 

 

 

ON / START / RUN

 

caution. May be used in conjunction

 

 

 

 

 

 

 

 

 

 

with other symbols or pictographs.

 

 

 

 

WARNING - READ OPERATOR'S MANUAL

Read the Operator’s Manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders.

WEAR EYE AND HEARING PROTECTION

WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1-1989 standards and ear protection when operating this unit. Use a full face shield when needed.

IGNITION SWITCH OFF or STOP

HOT SURFACE WARNING

Do not touch a hot muffler or cylinder. You may get burned. These parts get extremely hot from operation. When turned off they remain hot for a short time.

SHARP BLADE

WARNING: Sharp blade on cutting attachment shield. To prevent serious injury, do not

touch line cutting blade.

UNLEADED PETROL

Always use clean, fresh unleaded petrol.

OIL

Refer to operator's manual for the proper type of oil.

• MAXIMUM RPM

Do not operate the unit faster than the maximum RPM.

KEEP BYSTANDERS AWAY

WARNING: Keep all bystanders, especially children and pets, at least 15 meters (50 ft.)

from the operating area.

THROWN OBJECTS CAN CAUSE SEVERE INJURY

WARNING: Keep clear of blower outlet. Never point the blower at yourself or others. Objects can be thrown from blower. Do not operate unit without proper attachments and guards in place.

• CHOKE CONTROL

1 FULL choke position.

2 PARTIAL choke position.

3 RUN position.

13