1.9

Getting started
2If the volume you hear is satisfactory, skip to step 4. Otherwise, go on to step 3.
3Adjust the volume as you like:
To turn the volume up, press .To turn the volume down, press . The dis-
play, or
LCD
,indicates the volume. Here are the possible settings:
= Loudest setting.
= Medium setting.
= Low setting.
4Press
MONITOR
/
CALL
again to hang up.

Attaching a second phone

Want to attach a second phone (even a cordless model!) to your fax machine, so they
can share the same phone jack? No problem.
Before we go further, let’s explain the idea. You’re plugging the second phone’s
phone line into your fax machine’s
EXT
.
TEL
jack, not the wall phone jack. In such a
setup, only your fax machine connects to the wall. The second phone receives phone
signals through your fax machine.
Now, let’s proceed …
1If your second phone is already plugged into a wall phone jack, disconnect it
from that jack, at the jack. Hold onto the phone plug; you’ll need it in step 2.
Note: If your telephone is a model which also requires
AC
power, as is true
for the base of a cordless phone, don’t unplug it from its
AC
power
jack!
2Using the plug mentioned in
step 1, plug the phone cable
from your second phone into
the
EXT
.
TEL
jack on the rear of
your fax machine.
For information on how to use a connectedsecond phone with your fax machine, see
“Receiving faxes,” beginning on page 1.17.

Attaching an optional handset

If you purchase an optional handset for your fax machine, it comes with installation
instructions. However, here is a summary of how to attach the handset.
Important: Do not connect the handset directly to a telephone wall jack. Connect
the handset only to your fax machine as the instructions describe.
1Using a small Phillips-head screwdriver, attach the handset cradle to the side
of your fax machine using the screws included with the cradle.
2Plug one end of the handset cord (it’s curled) into the
HANDSET
jack on the rear of your fax machine.
3Plug the other end of the handset cord into the jack on the handset. If con-
nected to a phone line, your fax machine is now “off-hook.”
Note: The handset has a small “flash” button which you can press while
holding the handset, putting the fax machine back “on-hook” until you
can hang up the handset properly in step 4.
4Place the telephone handset onto the handset cradle. The cradle will press
the handset’s “flash” button, hanging up the handset.
Installation complete!Now, see how our EasyStart feature will haveyou up and running within minutes.
** Tel Mode **
Volume:
■■
** Tel Mode **
Volume:
■■■■
** Tel Mode **
Volume:
■■■■■■